Puck lights for inside cabinets

[frizbeedog]

Does anyone know of a puck light that is 120V supplied that can be hardwired?

Most I've seen are plug in type.

[quogueelectric]

Does anyone know of a puck light that is 120V supplied that can be hardwired?

Most I've seen are plug in type.
I generally steer clear of these but wac lighting might have something nice.

[Buck Parrish]

I think they get to hot for in the cabinet.

But back to your question. No , I,ve not seen any that are hard wired.

[frizbeedog]

I think they get to hot for in the cabinet.

But back to your question. No , I,ve not seen any that are hard wired.

I havn't either. Cabinet design got changed. Cabinets go all the way to the ceiling, almost, small space but crown molding already installed. No attic above this area, and cabinet dude drilled a hole in top of cabinet and poked the wires through. Bummer.

I was planning on switched receps above cabinet, but that's out.

I have to punt now. I might be looking at a small can light now.

[Buck Parrish]

They make some nice LED in recessed lights now. High dollar ones.

[frizbeedog]

They make some nice LED in recessed lights now. High dollar ones.

The light color wouldn't look right I don't think. Doesn't have that warm glow I think most people are looking for.

But I will check those out. Thanks. :smile:

[C3PO]

Nora makes some nice small can lights

[stickboy1375]

How about installing one of these on top of the cabinet. If the heights allow it. Check out the link for all the dimensions.

http://www.waclighting.com/data/PROD_PHOTO/325a3cef-c434-46d3-b005-ce6c1829682d.jpg
http://www.waclighting.com/USA/products/?categoryid=64&productid=845


Along with one of these,
http://www.waclighting.com/data/PROD_PHOTO/e2f5136e-92d0-4eac-ac94-822df0039063.jpg
http://www.waclighting.com/USA/products/?categoryid=67&productid=265

[frizbeedog]

How about installing one of these on top of the cabinet. If the heights allow it. Check out the link for all the dimensions.

http://www.waclighting.com/data/PROD_PHOTO/325a3cef-c434-46d3-b005-ce6c1829682d.jpg
http://www.waclighting.com/USA/products/?categoryid=64&productid=845


Along with one of these,
http://www.waclighting.com/data/PROD_PHOTO/e2f5136e-92d0-4eac-ac94-822df0039063.jpg
http://www.waclighting.com/USA/products/?categoryid=67&productid=265

Finally got these installed last week. Nice equipment. Seems well made. Finding anyone who stocks them was a problem. Order early I'd say.

Thanks Stickboy for the lead. I will use these again.

There was only one little problem. Since the transformer was taller than the space above the cabinets and the fact that I had no access above, I did have to bust out the drywall above to finesse them in place.

I had the bright idea that I would see how they fit before wiring. It fit great, but I dropped it inside the light hole above the cabinet and it took me 20 minutes to stand it back upright and wrestle it back out the hole. :mad:

I don't recommend a test fitting. :)

[cloudymacleod]

I havn't either. Cabinet design got changed. Cabinets go all the way to the ceiling, almost, small space but crown molding already installed. No attic above this area, and cabinet dude drilled a hole in top of cabinet and poked the wires through. Bummer.

I was planning on switched receps above cabinet, but that's out.

I have to punt now. I might be looking at a small can light now.
if cabinets r in ceiling, why not go for a small recessed light?

[frizbeedog]

if cabinets r in ceiling, why not go for a small recessed light?

The lights I used are small. That was the whole point. :smile:

[stickboy1375]

The lights I used are small. That was the whole point. :smile:

Yep, A normal recess light in a cabinet would look terrible IMSO....

[frizbeedog]

Yep, A normal recess light in a cabinet would look terrible IMSO....

I've seen this a lot.

IMsuperiorO?

IMslackerO?

IMsleepyO?

IMsarcasticO?

IMstickboyO?

:D

[stickboy1375]

I've seen this a lot.

IMsuperiorO?

IMslackerO?

IMsleepyO?

IMsarcasticO?

IMstickboyO?

:D


In My Stupid Opinion, It goes back to a thread that someone started. :grin:

[quogueelectric]

Hey dogboy I said check out wac lighting in the second post and then stickboy comes along and steals the show.
Well I ought to tie a shoestring to a wiffleball and tie it to your tail.
That ought to keep you busy for a little while.
"Oh I put them in and they are just perfect"
I will get you a spot on project runway for petes sake if thats the way you roll.

[stickboy1375]

Hey dogboy I said check out wac lighting in the second post and then stickboy comes along and steals the show.
Well I ought to tie a shoestring to a wiffleball and tie it to your tail.
That ought to keep you busy for a little while.
"Oh I put them in and they are just perfect"
I will get you a spot on project runway for petes sake if thats the way you roll.

We did have a few PM messages if it makes you feel any better.... :rolleyes: :D

[quogueelectric]

We did have a few PM messages if it makes you feel any better.... :rolleyes: :D
Id still like to wiffleball him just for good measure.

[frizbeedog]

Id still like to wiffleball him just for good measure.


I consider myself wiffeballed and measured.

Thanks to you too quog. :)

[quogueelectric]

I consider myself wiffeballed and measured.

Thanks to you too quog. :)
OK I will sleep tonight without thinking "Thanks Stickboy for the lead. I will use these again."

[frizbeedog]

OK I will sleep tonight without thinking "Thanks Stickboy for the lead. I will use these again."


Can we be freinds again?

[quogueelectric]

Can we be freinds again?
You are mans bet friend you can be cows best friend too. I feel a lot of love here. Group hug.