PDA

View Full Version : Duplex meter pan

Jerseydaze
12-18-2007, 08:53 AM
Duplex meter pan Im looking for a residential duplex meter pan with 2 built in 100 amp mains for an over head service does anyone know if such thing exists.
ishium 80439
12-18-2007, 09:33 AM
Will something like this work?

http://www2.sea.siemens.com/NR/rdonlyres/456D4824-42B7-4C06-B8B1-0C72649E732A/0/125AMeterModulesRingStyle.pdf

It's listed at 125A but I assume that you can swap out the MB.
enosez
12-18-2007, 02:26 PM
Check with your local supply house. They will usually stock what is "allowed" by the POCO in your area.

In the end the POCO has to approve which meter box is accepted.
iwire
12-18-2007, 02:30 PM
Check with your local supply house. They will usually stock what is "allowed" by the POCO in your area.

That is excellent advice. :)
celtic
12-18-2007, 04:50 PM
Call the POCO...they will determine what is allowed.

As far as checking with supply houses(SH)...good luck...Cooper only carries Sq.D - if the POCO doesn't allow Sq.D ....keep driving until you hit the next SH....

...on the other hand, the POCO might only accept Sq.D.
dezwitinc
12-18-2007, 10:33 PM
Look at the Milbank website.
They have every conceivable arrangement possible.