lakee911
Senior Member
- Location
- Columbus, OH
So, this comes from another forum, but I don't agree with the responses there so I'm asking the experts...
My comment was to tie the extra wire to ground. Others thought that it should just be snipped on both sides.
What do we think?
I have a spool of SEOOW 10/4 wire I plan to use with locking plugs/recectpacles that only need 10/3 in the setup.
Is is ACCEPTABLE to just leave the wire cut flush to the cable or am I supposed to cap off every end unterminated (inside the connector bodies ) ....which may get a little tight in the body...
My comment was to tie the extra wire to ground. Others thought that it should just be snipped on both sides.
What do we think?