grantcool
Member
- Location
- Atlantic Beach, Florida
I'm wiring one half of a duplex. New single service to a 2 meter/2 disconnect combo can mounted on existing half.
Discos are 200A each. New half is being built against existing, new slab poured and connected with rebar to existing slab. Uffer ground in new slab, 4/0 feeders (4 wires) run in PVC.
1. Is this considered a Separate building?
2. Can I reduce the Grounding conductor size?
Discos are 200A each. New half is being built against existing, new slab poured and connected with rebar to existing slab. Uffer ground in new slab, 4/0 feeders (4 wires) run in PVC.
1. Is this considered a Separate building?
2. Can I reduce the Grounding conductor size?