I viewed an 1 1/2" GUAT being supported by three, reduced size conduits, ie. 2 @ 3/4" & 1 @ 1.0 ". Proper reducers were used and each conduit is supported within 3' of this GUAT..It is strictly being used as a JB / PB, without luminaires etc. Is this installation proper, based on the 2008 NEC? Were there any other recent NEC Codes ( 2002 / 2005) that would have made this installation improper ? If this were a Conduit Body vs a GUAT, would this installation be acceptable ? The IFC drawings show this installation, as I described.
Last edited: