Electron_Sam78
Senior Member
- Location
- Palm Bay, FL
Does anyone manufacture a PVC SLB? I'm looking for a 2"
2" pvc slb
- Thread starter Electron_Sam78
- Start date
- Status
Cavie
Senior Member
- Location
- SW Florida
I've never seen pvc slb only lb's
- Location
- Chapel Hill, NC
- Occupation
- Retired Electrical Contractor
I have always heard them called service LB's -- thus the SLB. I also have not seen them in pvc but that doesn't mean they aren't out there.
I think the S would be a problem.
I always thought it was short LB since they are shorter than LB's
If you need a standard PVC LB, no problem. Even the Dome Depot has them.
If you have space restrictions, use a JB and drill it.
Beware of wire bending radius if applicable.
I always thought it was short LB since they are shorter than LB's
If you need a standard PVC LB, no problem. Even the Dome Depot has them.
If you have space restrictions, use a JB and drill it.
Beware of wire bending radius if applicable.
Last edited:
Cavie
Senior Member
- Location
- SW Florida
ceb58
Senior Member
- Location
- Raeford, NC
Every one forgive me but........ I have bought one at Lowes.
- Location
- Illinois
- Occupation
- retired electrician
What would you use it for? Even an standard 2" LB is probably too small to put the wires in if this is for a service.
- Location
- Chapel Hill, NC
- Occupation
- Retired Electrical Contractor
I have never used them for a service but I have used 1/2" slb because they are smaller and a bit tidier. Of course I was using small wire-- #12. I can't imagine 3/0 copper in these.:grin:
- Location
- Chapel Hill, NC
- Occupation
- Retired Electrical Contractor
.
I don't believe that is a slb. It does not look like the metal ones anyways.
Electron_Sam78
Senior Member
- Location
- Palm Bay, FL
I guess I'm outta luck.
It will contain 4 #2 THHN and 1 #4 RHW. 2" conduit is upsized for this application so I wanted to use a smaller profile LB to stay closer to the surface of the structure
It will contain 4 #2 THHN and 1 #4 RHW. 2" conduit is upsized for this application so I wanted to use a smaller profile LB to stay closer to the surface of the structure
Electron_Sam78
Senior Member
- Location
- Palm Bay, FL
ceb58
Senior Member
- Location
- Raeford, NC
Yes, a 2". I cannot guarantee every Lowes have them but I was working out of town and needed the short profile for what I was doing. Nothing open but Lowes and while looking around there they were.
Electron_Sam78
Senior Member
- Location
- Palm Bay, FL
Well I'll be a monkey's uncle
- Status