mark32
Senior Member
- Location
- Currently in NJ
Picture a stand by gen placed 5' from a house, when factory installed whip and j-box are stretched to the house there is very little slack, not even sure there's enough slack to throw a strap on it. If able to do even that the whip would be pulled even tighter. Personally I don't like the look of it, not to mention the j-box would be only about 3' above ground. What to do here,
A) Just mount the j-box and forget it
B) Put in a 6x6 post half way between house and gen, mount a new j-box on house, pipe down from there underground to 6x6 post, mount factory j-box on post.
C) Lengthen factory whip and conductors
Not sure if there's a straight or a 90 degree connector coming off the gen, changing a straight to a 90 could help. What do you guys think, any suggestions?
A) Just mount the j-box and forget it
B) Put in a 6x6 post half way between house and gen, mount a new j-box on house, pipe down from there underground to 6x6 post, mount factory j-box on post.
C) Lengthen factory whip and conductors
Not sure if there's a straight or a 90 degree connector coming off the gen, changing a straight to a 90 could help. What do you guys think, any suggestions?
Last edited: