So your employer supplies you with meters? I don't mean power quality
analyzers and the like, but your standard ol' Fluke or Simpson.
in most cases, other than a rudimentary fluke, yeah.
a quick google search for "ibew tool list" pulled up this....
i know we have no opinion on organized vs. disorganized labor,
but they have lists of crap like this..... i used to have a rule of
thumb that if it fit in a 6 gallon bucket, it was fair to bring it...
and i got my ass chewed a few times for creatively filling the
bucket.... :dunce:
IBEW 440 Journeyman Tool List
Journeyman's Tool List
Section 2.24 Journeymen/Apprentices shall be required to provide themselves with the following tools:
Knife
Pliers - - Cutting
Claw Hammer
Wire Stripper
Rule or Tape - - 30'
Screwdriver(s), (Not over 8" inch)
10" adjustable wrench
Allen Wrenches to 3/8"
Spin Type Nut Drives
3/16", 1/4", 9/32", 7/16",
3/8" and 1/2"
Socket set 3/8" Drive -- (Sockets to
??)
Pencil
Level - - Small
Hacksaw Frame
Long Nose Pliers
Plumb bob
Diagonals
Tool Pouch and Belt
Center Punch
Voltage Tester - 600 Volt, (Wiggins
Type)
Pliers, Pump or
Channel Lock(s) (not to exceed #430)
Tool Box