Hi All
I have one branch circuit of 230 v,50 hz having 60 Nos of 32 watts lights.circuit run is about 500 feet total, including 200 feet home run(to DB). According to our specs "if total circuit run is more than 200 feet,wire size shall be 10 AWG other wise 12 AWG.my question is "Can we run the home run 10 AWG(about 200 feet) then splice it to two branch circuits of 150 feet each with 12 AWG wires.is NEC will allow this type splice(splice with two sized wires)..?
Thanks in advance
Siva
I have one branch circuit of 230 v,50 hz having 60 Nos of 32 watts lights.circuit run is about 500 feet total, including 200 feet home run(to DB). According to our specs "if total circuit run is more than 200 feet,wire size shall be 10 AWG other wise 12 AWG.my question is "Can we run the home run 10 AWG(about 200 feet) then splice it to two branch circuits of 150 feet each with 12 AWG wires.is NEC will allow this type splice(splice with two sized wires)..?
Thanks in advance
Siva