flintsilver7
New member
I want to add a load to my washing machine circuit. I have an exterior floodlight to add, and there are two circuits in my basement. One powers four ceiling lights and 10 or 12 outlets. The other powers only the washing machine. Both are single-pole, 120V breaker circuits.
Is there any reason why I should not add to the washing machine circuit? Again, it's separate from the dryer, and it has no other loads it. I skimmed through the NEC very quickly and I couldn't find anything that said this was a bad idea. The wiring itself is 12/2, no different than any other circuit.
Is there any reason why I should not add to the washing machine circuit? Again, it's separate from the dryer, and it has no other loads it. I skimmed through the NEC very quickly and I couldn't find anything that said this was a bad idea. The wiring itself is 12/2, no different than any other circuit.