big john
Senior Member
- Location
- Portland, ME
I have a control cabinet (which might at some point have a PLC in it) that will be running two 1.5HP motors that will be operating together, but are not on one machine. Would it be acceptable for me to put the disconnect-switches and overloads for both motors all in that same cabinet?
I know 430.103 says that a disconnect means can be in the same enclosure as the controller. I'm just not too clear if I'd be allowed to put everything in the same box.
Thanks.
-John
I know 430.103 says that a disconnect means can be in the same enclosure as the controller. I'm just not too clear if I'd be allowed to put everything in the same box.
Thanks.
-John