Search:

Type: Posts; User: Sierrasparky

Page 1 of 8 1 2 3 4

Search: Search took 0.75 seconds.

  1. Replies
    5$$
    Views
    76

    I forgot about 75C, So at what point do you need...

    I forgot about 75C,
    So at what point do you need to do something about the less than 90Deg C wiring that so many new fixtures require.
  2. Replies
    27$$
    Views
    643

    What abount running thread conduit! :ohmy:

    What abount running thread conduit! :ohmy:
  3. Replies
    10$$
    Views
    470

    Ya know I just don't get companies like Verizon....

    Ya know I just don't get companies like Verizon. Why they refuse to look at their problems and make proper assesments.

    Well I have the same issues with Verzion in my neck of the woods. Wether...
  4. Replies
    5$$
    Views
    76

    I'm not so sure. If I recall correctly THHN was...

    I'm not so sure. If I recall correctly THHN was just comming on the market late 70's and early 80's.

    I worked a supply house as a kid and they still had THW stock in 80. was THW 60 or 90 at the...
  5. Replies
    31$$
    Views
    610

    Did not cite the code however that is what I...

    Did not cite the code however that is what I meant!
  6. Replies
    26$$
    Views
    450

    That would be a pain, That would seem a bit...

    That would be a pain, That would seem a bit rediculous to me.
  7. Replies
    4$$
    Views
    84

    I just use a handy rag. I've never seen a telco...

    I just use a handy rag.
    I've never seen a telco guy ever use anything else.
  8. Replies
    15$$
    Views
    294

    See I thought there was a requirement for the...

    See I thought there was a requirement for the breaker to have an internal trip. You could not just have a handle tie.
    Probably a tale ffrom that source.
    I could be wrong.
  9. Replies
    5$$
    Views
    76

    Do the new fixtures require 90 deg C wireing at...

    Do the new fixtures require 90 deg C wireing at the oulet boxes where only 60 Deg is present. ?
  10. Replies
    15$$
    Views
    294

    sure , if that is what is says. So then there...

    sure , if that is what is says.

    So then there is not requirement for internal common trip?
  11. Replies
    15$$
    Views
    294

    As stated by other the ouside are not internal...

    As stated by other the ouside are not internal common trip just a handle tie. They will not if or at all the time trip both poles of the outside handles.
  12. Replies
    8$$
    Views
    143

    Well I know that OSHA does not apply to a single...

    Well I know that OSHA does not apply to a single man shop where no other tradesman are present on private works. I know that from a CALOSHA person a few years ago. The minute another trade arrives on...
  13. Interesting , something to try myself.

    Interesting , something to try myself.
  14. Replies
    27$$
    Views
    643

    Out here on the west coast, we us all in one...

    Out here on the west coast, we us all in one combos so that is not usually a issue.
  15. Replies
    15$$
    Views
    294

    The outside of these quads are not common trip...

    The outside of these quads are not common trip though.
  16. Replies
    31$$
    Views
    610

    Load evenly proportioned, definately into play in...

    Load evenly proportioned, definately into play in that case.
  17. Replies
    19$$
    Views
    453

    I am with you. I don't use MWBC much anymore.

    I am with you. I don't use MWBC much anymore.
  18. Replies
    8$$
    Views
    287

    Thank you for the great response, Greyhair!...

    Thank you for the great response, Greyhair!
    Sometimes you forget to look at those small clues. Hopefully the OP will return with some more details.

    Oh , Welcome to the Forum :thumbsup:
  19. Replies
    17$$
    Views
    731

    The furnace is fed by the 120v supply. There...

    The furnace is fed by the 120v supply. There should be hot , N,and G. There probably is a circuit that knows if the Neutral is live compared to ground.
  20. Replies
    19$$
    Views
    453

    i would agree with that one 100%:blink:

    i would agree with that one 100%:blink:
  21. Replies
    7$$
    Views
    229

    Many times the Coil Laminations will cause the...

    Many times the Coil Laminations will cause the buzzing. Clean that area also
  22. Replies
    8$$
    Views
    287

    Have not heard of a issue. have the fire...

    Have not heard of a issue.
    have the fire inspector cite a code refrence.
    You should be able to use the device as instructed.
  23. Thread: legal?

    by Sierrasparky
    Replies
    12$$
    Views
    415

    Hope she feels better.

    Hope she feels better.
  24. Thread: legal?

    by Sierrasparky
    Replies
    12$$
    Views
    415

    As long as you use appropriate materials it is...

    As long as you use appropriate materials it is ok.
    How else do you install show window receptacles.
  25. Thread: legal?

    by Sierrasparky
    Replies
    12$$
    Views
    415

    Well at least it is not up inside the drop...

    Well at least it is not up inside the drop ceiling.
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4