Search:

Type: Posts; User: ptonsparky

Page 1 of 8 1 2 3 4

Search: Search took 0.86 seconds.

  1. Replies
    2$$
    Views
    78

    How much have you figured out? What do you think...

    How much have you figured out? What do you think will work and pass an inspection if required?
  2. Replies
    21$$
    Views
    1,538

    Yup, typical siding install. They must all go to...

    Yup, typical siding install. They must all go to the same school of HalfAssedWorkmanship.
  3. The assumption is made that you are using...

    The assumption is made that you are using constant resistance type loads and not an incandescent lamp.
  4. Replies
    2$$
    Views
    125

    Is having it repaired even an option? Do you...

    Is having it repaired even an option? Do you have someone in the area that works on it?
  5. Replies
    24$$
    Views
    609

    A HOA does not qualify as a disconnecting means...

    A HOA does not qualify as a disconnecting means even if it is within sight of the motor, or controller for that matter. You must disconnect the controller, ie line side conductors and or the...
  6. Replies
    7$$
    Views
    461

    [QUOT=Rampage_Rick;1610161]Ouch... *edit*...

    [QUOT=Rampage_Rick;1610161]Ouch...



    *edit* I believe there was an earlier PSA on the 140M breakers back in 2005.[/QUOTE]
    Ouch is right. Same problem.

    Do they make their own or relabel?
  7. Replies
    7$$
    Views
    461

    No. An AB product.

    No. An AB product.
  8. Replies
    7$$
    Views
    461

    Very serious problem under the right conditions. ...

    Very serious problem under the right conditions. We will replace them as soon as replacements are available and worry about who pays later. In the mean time the customer has been made aware of the...
  9. Replies
    7$$
    Views
    461

    product recalls

    We were notified today of a "potential anomaly" on a product that had certain date codes. It was easy enough to see where the items went but do not track the date codes to know if the ones we...
  10. Replies
    11$$
    Views
    990

    FWIW, I give lump some for the project per...

    FWIW, I give lump some for the project per plans. Additional openings are $××.×× each prior to roughin completion. $ yx.xx after roughin. $ zyx.xx after sheetrock.

    FWIW, my preference is no...
  11. Try to visualize the EG as just an extension of...

    Try to visualize the EG as just an extension of one of your meter leads... all the way back to where the neutral and EG are tied together. The neutral has a current flow and consequently some...
  12. Replies
    3$$
    Views
    354

    Try 430.120 The vfd will have to be sized...

    Try 430.120

    The vfd will have to be sized about double to run your 15 hp pump. So will everything else on the line side.
  13. What happens with the L-G fault that you have...

    What happens with the L-G fault that you have some day?
  14. Replies
    23$$
    Views
    1,084

    An open circuit is still open regardless of...

    An open circuit is still open regardless of insulation providing the separation or air space.

    Calibration Is good but it matters zilch if you dont know what you are looking at. Grab a paper and...
  15. Replies
    8$$
    Views
    284

    Great and mighty programmer that I am:lol:, we...

    Great and mighty programmer that I am:lol:, we use the Hand position to alarm operators and/or prevent operation until it is returned to the Auto. All interlocking is done via the logic and Hand...
  16. Replies
    21$$
    Views
    728

    You only have to carry the one?

    You only have to carry the one?
  17. Replies
    21$$
    Views
    728

    FWIW, EGs were substantially smaller at one time...

    FWIW, EGs were substantially smaller at one time in some of the older nm cable. If it was legal when installed, it still is.
  18. Replies
    10$$
    Views
    412

    RH = RHINO All plastic and most likely as you...

    RH = RHINO

    All plastic and most likely as you describe, little or no shielding.
  19. Replies
    10$$
    Views
    412

    I found a Yaskawa P7 Manual online but at the...

    I found a Yaskawa P7 Manual online but at the moment I have failed to find the capacity of its DC control. My eyes are crossed and time for lunch.:?
  20. Replies
    10$$
    Views
    412

    I checked voltage on the VFDs low voltage control...

    I checked voltage on the VFDs low voltage control and it appears to be functioning. Once I get a look at the manual we will most likely do away with the external supply.

    The power supply would...
  21. Replies
    10$$
    Views
    412

    It is in lower portion of vfd. Don't know hot it...

    It is in lower portion of vfd. Don't know hot it gets there.
  22. Replies
    10$$
    Views
    412

    Obviously not factory and yes code violation, but...

    Obviously not factory and yes code violation, but what causes yearly demise?
  23. Replies
    10$$
    Views
    412

    24v dc pwr supply

    New customer via a pump installer that sends me "opportunities" on occasion.

    An external power supply for a transducer to his well VFD fails about once a year. He pointed it out to me thru the...
  24. My SEWAG, you had voltage feeding through the...

    My SEWAG, you had voltage feeding through the various odd & end equipment to give you at least some partial voltage on the lost phase. Water heaters, transformers, etc, etc.
  25. Replies
    11$$
    Views
    473

    WK2 is what I am trying to solve for. I haven't...

    WK2 is what I am trying to solve for. I haven't had much time to study it, but that may not help me anyway.
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4