|
|
|
#1
11-04-2009, 12:44 PM
|
|||
|
|||
Over current devices
This one I'm not shure about either...
Overcurrent devices are allowed: A) over steps of a stairway B)in dwelling bathrooms. C)In commercial bathrooms. D)In the vicinity of easily ignitable material. I chose...D) But it's not something that you'd think of... |
|
#4
11-04-2009, 02:25 PM
|
||||
|
||||
|
This one changes completely, depending on whether it is based on the 2005 NEC or the 2008 NEC. One of the articles Conduit mentioned did not exist in the 2005. Which book are you using as a reference?
__________________
Charles E. Beck, P.E., Seattle |
|
#5
11-04-2009, 03:04 PM
|
||||
|
||||
|
Quote:
__________________
Unlimited Electric Contractor/Standard Electric Inspector/Traffic Signal Inspector/Highway Lighting and Level One Traffic Signal Installer. I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant. |
|
#7
11-06-2009, 12:48 AM
|
|||
|
|||
|
I'm sorry for not getting back sooner. I'm in 2008 and I don't have my code book in front of me. and probably made an uneducated guess on this one...
|
|
#8
11-06-2009, 12:55 AM
|
|||
|
|||
|
It from time to time can be a host of different things that get near an overcurrent device such as a breaker or motor overload device or disconnect of some sort. I remember in denver when I was an apprentice going to service some equipment at a matress factory. And there where all sorts of easily ignitable materials near the equipment. As an example.
Existing operations. People don't think about it until they are reminded by the fire department.... |
|
#9
11-06-2009, 12:59 AM
|
||||
|
||||
|
Quote:
...................
__________________
Instructor, Industry Advocate |
|
#10
11-09-2009, 12:59 PM
|
|||
|
|||
|
Checking answers...
I posted this in the wrong place......s
Last edited by geraldkinen; 11-09-2009 at 01:07 PM. |
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
