Sunday Evening STV

Status
Not open for further replies.

220/221

Senior Member
Location
AZ
....shall be installed so that room airflow over such surfaces is not prevented.....

There is no room therefore no room airflow.

The 1/4 stand off bumps take care of the technical end.
 

iaov

Senior Member
Location
Rhinelander WI
My guess is that there is room for air flow, but that flow is hot air from the condensor coils located right in front of the panel.
 

chris kennedy

Senior Member
Location
Miami Fla.
Occupation
60 yr old tool twisting electrician
So where the heck did Chris go? He just gonna leave us hanging?:confused:

Sorry, I went to work. Won't happen again.

I still say that's plumbing pipe coming out of the top of the panel.
White paint from a previous paint job.

What are the two other pipes/wires running down from meter on both sides of the coduit?

The one one the left is a shadow, the one on the right contains GEC.
 

iaov

Senior Member
Location
Rhinelander WI
I think 110.13 works but 312.2 is more specific. I still don't like the posistion of the air conditioner but I may not be seeing it good in the picture.
 

chris kennedy

Senior Member
Location
Miami Fla.
Occupation
60 yr old tool twisting electrician
I think 110.13 works but 312.2 is more specific. I still don't like the posistion of the air conditioner but I may not be seeing it good in the picture.

There are no 110.26 issues, just the angle of the picture. I took that angle to get the sinking lateral (for old time sake).
 
Status
Not open for further replies.
Top