hardworkingstiff
Senior Member
- Location
- Wilmington, NC
Scenario:
120/240-volt service feeds an 800-amp panel. Panel feeds the boat slips. Each slip has an independent electronic meter and counter to monitor the individual boat power usage.
Problem:
Power company usage is much higher than the combined usage of the boats (worst month was boat meter readings = 2,000KW and PoCo readings were 4,000KW).
Customer owns the wiring from the transformer to the panel. CT's are in the (underground) transformer with the meter off to the side. I want to monitor power consumption at the MB of the panel for a month and compare it to the power company readings and the boat meter totals. (Our next course of action will be determined after these readings are analyzed).
Looking for recommendations of the best place to rent the equipment I need and what equipment you have had good experience with.
Thanks,
120/240-volt service feeds an 800-amp panel. Panel feeds the boat slips. Each slip has an independent electronic meter and counter to monitor the individual boat power usage.
Problem:
Power company usage is much higher than the combined usage of the boats (worst month was boat meter readings = 2,000KW and PoCo readings were 4,000KW).
Customer owns the wiring from the transformer to the panel. CT's are in the (underground) transformer with the meter off to the side. I want to monitor power consumption at the MB of the panel for a month and compare it to the power company readings and the boat meter totals. (Our next course of action will be determined after these readings are analyzed).
Looking for recommendations of the best place to rent the equipment I need and what equipment you have had good experience with.
Thanks,