Motor Wiring Help

Status
Not open for further replies.

gmangeoff

New User
Location
Granite Bay CA
I want to wire this motor to a simple on/off toggle switch as opposed to the original drum switch that took a dump. I got a professional grade 20A switch from Home depot, but I need to figure out how to connect the wires. There is a wiring diagram attached in the photos. Any help would be greatly appreciated. Thank you!
 

Attachments

  • IMG_5634.JPG
    IMG_5634.JPG
    85.6 KB · Views: 0
  • IMG_5637.JPG
    IMG_5637.JPG
    115.1 KB · Views: 0
  • IMG_5633.JPG
    IMG_5633.JPG
    89.7 KB · Views: 0
  • IMG_5618.JPG
    IMG_5618.JPG
    93.1 KB · Views: 0

GoldDigger

Moderator
Staff member
Location
Placerville, CA, USA
Occupation
Retired PV System Designer
I am closing this thread, in accordance with the Forum Rules.

This site is designed for:


  • Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
  • Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
If you feel this action to be in error, feel free to contact me via PM to explain.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the
report-40b.png
button at the bottom left corner of the post.
 
Status
Not open for further replies.
Top