conduit support and 2005 NEC 300.11

Status
Not open for further replies.

dg

Member
The hanger wire supporting the conduit is attached to the underside of the deck above. The hanger wire is 4 feet long. The contractor used a reddi-clip to secure the conduit to the hanger wire, about 2 inches from the end of the 4-foot long hanger wire. Does this installation meet 2005 NEC 300.11?
 

Flex

Senior Member
Location
poestenkill ny
What about a 1/4" threaded rod 4' long with a mini on the end, thats a sturdy as some of that old ceiling tie wire. Id consider the rod fine so why not the tie wire?
 
Status
Not open for further replies.
Top