Texas Master Electrician

[JJK]

Im having a hard time passing the Texas Master Electrician Test. I got the California license on my first try. I'm on my 3rd test for Texas. I got a 45 on my first try then got Mike Holts exam prep and got a 70 but missed it by 5. Anything can help. Im frustrated and have a re-test in 7 days. Any suggestions

[PEDRO ESCOVILLA]

i'm taking a prep class with ray holder in arlington texas, the weekend of june 9-10. he's supposed to provide an be excellent seminar/test prep. it's on 2011 nec. there may still be room in the class. look him up on the net. try "ray holder electrical classes" it's actually "ray holder electrical seminars". good luck, keep studying, you'll get it. do you know where you're having trouble with it? if so, focus on that stuff. go thru all the info you've studied so far again before you retest.

[PEDRO ESCOVILLA]

JJK, how you doing on prep for your exam ? did you find out what your weak spots were ?

[Stevareno]

i'm taking a prep class with ray holder in arlington texas, the weekend of june 9-10. he's supposed to provide an be excellent seminar/test prep. it's on 2011 nec. there may still be room in the class. look him up on the net. try "ray holder electrical classes" it's actually "ray holder electrical seminars". good luck, keep studying, you'll get it. do you know where you're having trouble with it? if so, focus on that stuff. go thru all the info you've studied so far again before you retest.

My advise: If you don't understand something, ask questions. I found that his 'seminar' was nothing more than a quick reference. If you don't already know how to do the basic calculations, this seminar will not help you. There is just not enough time to cover the intricrate details you need to know for most of the calculations.

More than half the time spent in the 'seminar' is taken up by going through and highlighting your code book from the similated test questions they give you. If you get behind asking too many questions, you will not be able to finish highlighting your code book. Not real conducive to learning.

Now I'm not saying his 'seminar' is a rip-off, but it sure isn't worth what he charges (IMHO).

[Stevareno]

One other thing. If you don't have a soft bound 2011 NEC, GET ONE. Loose leaf and spiral bound are not allowed for testing, and if you show up without one at the seminar they will strongly suggest that you go get one.

[PEDRO ESCOVILLA]

i took it today, missed it by 7 points (68) i will say this, it is HEAVY on load calculations, feeder demand , generator q's, seem like one wild load calc after another. and they are crazy questions, with tons of info to go through. I'll study up and get 'em next time










there ain't many problems that a man can't fix, with $700.00 and a 30.06

[dneprcowboy]

The biggest trick to the NM and TX exams are the major load calc questions are worth one point as well as the "what color is a ground screw" type questions. Skip over all the hard questions and do the easy ones first. Then go back and work on the hard ones.