jrlelectric
Member
- Location
- Valencia California
If someone can give me your thoughts about this. What do most contractors prefer to install. Square D makes both of these. We used to mainly use large I-Line Panels so higher amperage circuit breakers can be installed in the future. Lately it seems that the small 480 volt NF panels are being used that will accept a maximum of 125 Amps.
These NF Panels are under $1000.00 with 4 three pole breakers and the availability is good.
What do you prefer?
These NF Panels are under $1000.00 with 4 three pole breakers and the availability is good.
What do you prefer?