matt_mackay
Member
- Location
- Zion National Park, Utah
I was recently called to investigate trailer equipment problems in a campground i.e exploding microwaves, tv's, stereos. I found each trailer ped was fed with 2 hots ,and a neutral. Also at each ped is what appears to be a #6 bare maybe attached to a ground rod. There is no bonding screw or bonding wire connecting neautral lug to ground lug or grounding wire attaching receptacles to ground lug. When I find something that seems so wrong I start double guessing myself.
Doesn't code require an equipment ground to be run with feeder conductors as well as a ground rod at the remote location? Unless of course it was installed before 1999. What about the 50a, 30a, and 15a receptacles not connected to ground except via contact with the metal of the ped. Please tell me I'm not going crazy Thanks
Doesn't code require an equipment ground to be run with feeder conductors as well as a ground rod at the remote location? Unless of course it was installed before 1999. What about the 50a, 30a, and 15a receptacles not connected to ground except via contact with the metal of the ped. Please tell me I'm not going crazy Thanks