two overhead feeders on a single pole

Status
Not open for further replies.

mandysmom2005

New member
Location
Jamestown, NY
We will be replacing a single overhead feeder in a campground with 2 overhead feeders. These feeders will take the same path along the campground poles and we will be supporting the 2 feeders on the same poles. Looking at 225.14(d) it looks like the 2 feeders need to be 1 ft apart on the same pole. Am I reading this right? We are using quadruplex wiring. its a 120/240v circuit and will use the bare wire for EGC.
 
Status
Not open for further replies.
Top