Results 1 to 6 of 6

Thread: Holt Electrical Training Products with 2017 NEC updates?

  1. #1
    Join Date
    Mar 2017
    Location
    Norwalk, CT
    Posts
    2

    Holt Electrical Training Products with 2017 NEC updates?

    Hoping this is the right forum.

    Was wondering if Mike Holt will make new videos and training DVDs that include the updated 2017 NEC codes. Or will purchasing the previous training kit with the 2014 codes be sufficient enough for new Exam preps?

    Also, will the 2017 Exams include questions from the 2017NEC or will it be reflected with next years exams?

    Thank You.

  2. #2
    Join Date
    Feb 2003
    Location
    Illinois
    Posts
    23,098
    Mike is in the process of recording the DVDs for the 2017 code. I believe that there is one left to record. The 2017 code changes book and DVD is available now. I am not sure when the complete set for the 2017 cycle will be available.
    Don, Illinois
    The code only applies to T&M work....it does not apply to contract work.

  3. #3
    Join Date
    Mar 2003
    Location
    Vermont
    Posts
    964
    We've used the on line updates now for a few cycles , with great success

    But we're a tad pressed for time with the '17 , any idea when they debut ....?


    ~RJ~

  4. #4
    Join Date
    Mar 2017
    Location
    Norwalk, CT
    Posts
    2
    Quote Originally Posted by don_resqcapt19 View Post
    Mike is in the process of recording the DVDs for the 2017 code. I believe that there is one left to record. The 2017 code changes book and DVD is available now. I am not sure when the complete set for the 2017 cycle will be available.
    Good info. Thank You.

  5. #5
    Join Date
    Feb 2003
    Location
    Bremerton, Washington
    Posts
    7,511
    you can check with the office and they will give you a schedule of the release dates for the 2017 products
    Moderator-Washington State
    Ancora Imparo

  6. #6
    Join Date
    Feb 2003
    Location
    Illinois
    Posts
    23,098
    The last DVD for the 2017 series will be recorded 4/7 through 4/10. You can watch it live as it is being recorded at www.mikeholt.com/live. You can also post questions that Mike tries to answer at breaks and at the end of the day. This recording is for Chapters 5-8.
    Don, Illinois
    The code only applies to T&M work....it does not apply to contract work.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •