mark32
Senior Member
- Location
- Currently in NJ
An aquaintance is renovating his kitchen and I am handling all the electrical needs. The installation manual on one of his ranges:
http://www.subzero-wolf.com/~/media... wolf/installation guides/wolf/dfrange ig.pdf
shows on page 6 the area behind the stove in which the receptacle is to be. The dedicated height is only 3.25". On page 4 it states the box should be flush in the wall or floor. How would you install this receptacle? Typically I'd use a two gang but that would likely put me higher than the alloted 3.25" even if mounted on the 2x4 plate in the wall.
http://www.subzero-wolf.com/~/media... wolf/installation guides/wolf/dfrange ig.pdf
shows on page 6 the area behind the stove in which the receptacle is to be. The dedicated height is only 3.25". On page 4 it states the box should be flush in the wall or floor. How would you install this receptacle? Typically I'd use a two gang but that would likely put me higher than the alloted 3.25" even if mounted on the 2x4 plate in the wall.