Results 1 to 4 of 4

Thread: Buss Duct Lockout?

  1. #1
    Join Date
    Feb 2009
    Location
    Kaukauna, Wisconsin
    Posts
    49

    Buss Duct Lockout?

    Not sure that this exists, but I don't know how it doesn't yet. I'm looking for a buss duct lockout device. We have Buss Duct about 15' above the floor, and we use an insulated buss switch to turn on and off the disconnect but then I need to get a scissor lift from the other side of the building, to lock out the buss switch. I'm looking for something that could lockout the buss switch from the ground? In my mind a hot stick with a lockout hasp attached to the end and some articulating mechanisms in between. Has anyone ever seen something like this?

  2. #2
    Join Date
    Jul 2008
    Location
    North Of Tampa Fl
    Posts
    387
    We hang the Salisbury Tagging Device on the switches with a lock-out tag attached to them . Its more of a safety issue to try to get into some areas to hang a actual lock . This is in our safety manual as a acceptable lock out tag out ...

  3. #3
    Join Date
    Feb 2009
    Location
    Kaukauna, Wisconsin
    Posts
    49
    Quote Originally Posted by Davebones View Post
    We hang the Salisbury Tagging Device on the switches with a lock-out tag attached to them . Its more of a safety issue to try to get into some areas to hang a actual lock . This is in our safety manual as a acceptable lock out tag out ...
    Do you have a part number for the Salisbury tagging device?

  4. #4
    Join Date
    Jun 2006
    Location
    Ohio
    Posts
    20,259
    Quote Originally Posted by rhamblin View Post
    Do you have a part number for the Salisbury tagging device?
    https://www.salisburybyhoneywell.com..._and_covers/td
    I'll never get there. No matter where I go, I'm always here.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •