Results 1 to 1 of 1

Thread: Builder grade low durability LED bulbs and T8. Great for low annual burning hours

  1. #1
    Join Date
    Jun 2010
    Posts
    1,903

    Builder grade low durability LED bulbs and T8. Great for low annual burning hours

    Cheaper, but short lived LED lamps are now commonly available. They are especially suited for residential use as well as commercial and industrial applications where annual operation time is 1,000 hours or less but subject to short and frequent cycling that do not play well with CFLs. Value TLEDs are great for sheds, utility closets where cold temperature performance is valuable but they're not suitable for traditional applications for fluorescent lamps where they they burn for thousands of hours a year.

    Lumalux is a HPS. MetalArc is a MH.
    Click image for larger version. 

Name:	LLD2.jpg 
Views:	22 
Size:	107.5 KB 
ID:	18372

    This is the lumen maintenance performance for now outlawed, obsolete F40CW using traditional phosphors. From 1994.
    Click image for larger version. 

Name:	f401994.jpg 
Views:	22 
Size:	41.9 KB 
ID:	18373

    F40 was rated for 20,000 hours with 3 hours to the start. Many retail and office applications extends this to 30 to 36K.
    Click image for larger version. 

Name:	t1240k.jpg 
Views:	21 
Size:	32.7 KB 
ID:	18376

    The best selling LED is the builder grade or "value" but it's an entirely different class of product as you can see from the graph. It is a good fit for relatively low hour applications with usage pattern that is destructive to fluorescent lamps such as individual apartments. The poor durability makes the energy performance worse as you need more watts installed to sustain the same output. For areas that get 4,000+ hrs a year and it is considered acceptable to start at 2,000 lumens that degrade to 1,400 per lamp, the better energy saving approach is to start off around 1,500 lm with lamps with very low depletion.

    Click image for larger version. 

Name:	ledfailed.jpg 
Views:	22 
Size:	10.7 KB 
ID:	18374

    TLEDs that can hold their ground against super premium T8, the cost is something else.
    Click image for larger version. 

Name:	bgrade2.jpg 
Views:	21 
Size:	142.2 KB 
ID:	18375

    Examples of value LED. Cost competitive in that they cost about the same as ultra premium fluorescent while being an LED but 36K hours to L70 makes it not perform as well for long hour applications.
    Click image for larger version. 

Name:	weak1.jpg 
Views:	21 
Size:	95.1 KB 
ID:	18370

    The lowest end of modern LEDs are only rated for 11,000 hours to 30% light loss. The 800 lm sold as 60W equivalent and 10 times the life of incandescent fades to 560 lm.
    That's about 2.5 years for dusk-to-dawn and I expect some to experience ballast failure just like CFLs. These specifically disallow enclosed fixtures.

    Click image for larger version. 

Name:	builder_grade.jpg 
Views:	18 
Size:	56.1 KB 
ID:	18378

    This was the standard T8 23 years ago. It's self explanatory that allowing decay worse than two decades ago is not savvy. You need to have initial lumens that is 1.42 times the design lumen of a T8 system. This puts the break-even point for LEDs at 125lm/W or more. When you're using high degradation lamp source like MH and LEDs in fixed output, its a compromise between having a high initial over illumination or choosing a shorter re-lamp interval. The system could use dimming ballasts and increase the output periodically to counter LED degradation
    Click image for larger version. 

Name:	live.jpg 
Views:	21 
Size:	35.3 KB 
ID:	18371
    Last edited by Electric-Light; 08-28-17 at 06:54 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •