Anode
Member
- Location
- Washington, USA
I'm thinking there is some code that would prevent us from adding an outlet or circuit to a dedicated pv combiner panel. This combiner panel would be circumventing the 120% rule, as a dedicated pv combiner back feed panel...
I am going through the motions of design right now, and the issue I have is that this system would need to be a line side tap due to its size; however, the microinverters we would be using require the communications to go through the power line, and show in the installation guided connecting to the panel.
Is there a code against adding a load or circuit to that panel designated for pv only? Does it matter that this load is going to be virtually non existent? I know I just read something on this in another thread a week or so ago...
I am going through the motions of design right now, and the issue I have is that this system would need to be a line side tap due to its size; however, the microinverters we would be using require the communications to go through the power line, and show in the installation guided connecting to the panel.
Is there a code against adding a load or circuit to that panel designated for pv only? Does it matter that this load is going to be virtually non existent? I know I just read something on this in another thread a week or so ago...