Page 1 of 2 12 LastLast
Results 1 to 10 of 26

Thread: Low Voltage Exam Washington County Maryland - Failing

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2017
    Location
    Hagerstown, Md, USA
    Posts
    12

    Low Voltage Exam Washington County Maryland - Failing

    Any suggestions on prepping for the low voltage exam?

    Ive failed it 4 times already. I can not utilize the Index in time.. Is there any tricks to finding key words in questions to look up?

    I take it again Dec 8th and feel no more confident than before.

  2. #2
    Join Date
    Jun 2016
    Location
    Tampa, FL, USA
    Posts
    1,563
    Quote Originally Posted by Grapestew View Post
    Any suggestions on prepping for the low voltage exam?

    Ive failed it 4 times already. I take it again Dec 8th and feel no more confident than before.
    I'm assuming you already have a test prep book and have read it.

    First, cancel your test appointment.

    Second, do practice questions without timing until you are getting almost all of them correct.

    Then, do timed practice tests until you can score a 90% or better.

    If you never get there, check out being a plumber.


    Quote Originally Posted by Grapestew View Post
    Is there any tricks to finding key words in questions to look up?
    The key words are the most important words in the problem. Identifying those is a skill I don't know how to teach.
    Last edited by Coppersmith; 11-15-17 at 04:12 PM.

  3. #3
    Join Date
    Nov 2017
    Location
    Hagerstown, Md, USA
    Posts
    12

    Test prep book

    Quote Originally Posted by Coppersmith View Post
    I'm assuming you already have a test prep book and have read it.

    First, cancel your test appointment.

    Second, do practice questions without timing until you are getting almost all of them correct.

    Then, do timed practice tests until you can score a 90% or better.

    If you never get there, check out being a plumber.




    The key words are the most important words in the problem. Identifying those is a skill I don't know how to teach.

    Which Prep book do you recommend for low voltage?

  4. #4
    Join Date
    Nov 2017
    Location
    Hagerstown, Md, USA
    Posts
    12
    Quote Originally Posted by Coppersmith View Post

    If you never get there, check out being a plumber.
    Im a network engineer and all we want to do is pull cat5/6e cable. Im surprised they require all this. Very little is beneficial to me and useless information ill never use. Ive taken multiple exams for certifications, and this code book exam is a pain in the rear. Glad I didn't become an electrician!

  5. #5
    Join Date
    Jun 2003
    Location
    Hawthorne, New York NEC: 2014
    Posts
    3,656
    There is a big difference between the IT world and the real world. I see it every time I look at an IT persons work who "only wants to run some CAT5 or CAT6". Hopefully by the time you pass this test you won't be one of them.

    -Hal

  6. #6
    Join Date
    Dec 2007
    Location
    NE Nebraska
    Posts
    37,157
    What topics are you having trouble with?

    I agree with others that many IT guys I have come across know how to make final connections and do the software type tasks really well, but have no clue how to run wiring through a building.

  7. #7
    Join Date
    Nov 2017
    Location
    Hagerstown, Md, USA
    Posts
    12
    Quote Originally Posted by kwired View Post
    What topics are you having trouble with?

    I agree with others that many IT guys I have come across know how to make final connections and do the software type tasks really well, but have no clue how to run wiring through a building.
    I understand completely, I crossed over into IT and had the very same impression of them. A LOT are like that, although you shouldn't paint with such a wide brush. I went to school for electronics engineering and worked security for 12 years. We pulled every kind of cable you can think of for low voltage systems like fire/security alarms, access control, CCTV, Nurse call systems ,. I've performed Ariel runs, poll to poll, underground, from 18/2, 22/4, 22/8. RJ6-59/ etc,. Im no stranger to pulling the cabling. That said, I always worked under the company's licenses. I never once failed an inspection either, I know whats expected, I just need to speed up my navigating of the book.

    My main issue is locating code efficiently to beat the timer. It's hard finding the code for me. I know OHM's law and how to calculate formulas . I have just wasted money already and want to get the right study material so I can pull a freaking license when we land cabling jobs.

  8. #8
    Join Date
    Sep 2008
    Location
    UK
    Posts
    11,592
    Quote Originally Posted by Grapestew View Post
    Im a network engineer and all we want to do is pull cat5/6e cable.
    That's a job for a labourer or, at best, a technician. Not an engineer.
    Si hoc legere scis nimium eruditionis habes.

  9. #9
    Join Date
    Dec 2007
    Location
    NE Nebraska
    Posts
    37,157
    Quote Originally Posted by Besoeker View Post
    That's a job for a labourer or, at best, a technician. Not an engineer.
    He maybe isn't a PE but rather does a lot of design/build. Could have some limitations on what and where he can do the design portion.

  10. #10
    Join Date
    Jun 2003
    Location
    Hawthorne, New York NEC: 2014
    Posts
    3,656
    In the IT world you can become an "engineer" by passing the Microsoft MCSE exam.

    http://www.oocities.org/pipeline/5665/watsene.htm

    There was a lot of controversy at one time about the IT industry calling someone an "engineer" who did not have at least a four year engineering degree from a reputable institution. I don't think it's legal to use "engineer" on any published documents like advertising, business cards, etc if you haven't got that diploma.

    Sorry Grapestew.

    -Hal

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •