Results 1 to 3 of 3

Thread: Tying fire alarm system to Ansul system

  1. #1
    Join Date
    Aug 2015
    Location
    Lehigh Valley, PA
    Posts
    21

    Tying fire alarm system to Ansul system

    Hey guys! Long story short, wiring an Abdul fire suppression system for a small deli. Non-addressable system, so probably just going to be a a few smokes, a couple pull stations, and 3 horn strobes. I'm a little new to fire alarm wiring. Basically one of the Ansul micro switches will operate the intake and exhaust fans, and the other will kill the lights and receptacles under the hood. When that micro switch activates, I need it to activate all the fire alarms. So I'm not quite sure how to run this back to the fire control panel, as I will have 120v at the micro switch when the suppression system is activated. Any help with how to accomplish this?

  2. #2
    Join Date
    Aug 2015
    Location
    Lehigh Valley, PA
    Posts
    21
    Ansul*

  3. #3
    Join Date
    Oct 2007
    Location
    New Jersey
    Posts
    6,030
    Mods, this is a repeat. Original thread is here.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •