Results 1 to 2 of 2

Thread: Setting Device

  1. #1
    Join Date
    Sep 2012
    Location
    NJ
    Posts
    2,099

    Setting Device

    So if you have a 6” floor poke thru…kind of like the one inthe link below. Before the slab is poured what happens in terms of layout tomake sure you can install the poke thru? Would you actually set the poke thruprior to the pour? Thanks.

    https://www.legrand.us/wiremold/poke-thru-devices/recessed-poke-thru-devices/evolution-6at-poke-thru-device/6atc2p-recessed-prewired-assembly-with-surface-style-cover.aspx

  2. #2
    Join Date
    Jul 2003
    Location
    New Jersey
    Posts
    25,617
    6" plastic sleeve before the pour or core drill a 6" hole after.
    Rob

    Moderator

    All responses based on the 2014 NEC unless otherwise noted

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •