GFI breaker/ GFI receptacle problem

Status
Not open for further replies.

JACCO

Member
ok this is my first post. I have a 2 pole 60 GFI breaker that feeds a dock panel which feeds a 50 amp receptacle a boat lift and a single pole 20 receptacle. when a new live well is plugged into the single pole receptacle at the dock it trips the GFI breaker immediatly. with that said i then ran an extension cord ( 50') from a GFI at the house and it does not trip the GFI receptacle. i also ran a heat gun from the receptacle on the dock and it did not trip the GFI breaker. the GFI at the house is working properly. anyone have any ideas.
 
Status
Not open for further replies.
Top