tyha
Senior Member
- Location
- central nc
I have a fire pump wired from controller. controller has utility and gen back up power. plans call to run 1 conduit 3p 480V from utility and gen power contactors in controller plus ground. 7 supply wires total. peker head has 12 leads. 4-7 5-8 6-9. 1,2,3 to phase as a usual 480v motor. my question is do leads 10, 11,12 go to the conductors coming from the genset contatctor in the controller because those are the numbers marked on the contactor terminals but the nameplate on motor states differently
Last edited: