Results 1 to 6 of 6

Thread: Fault Current calculation software

  1. #1
    Join Date
    May 2003
    Location
    MA
    Posts
    409

    Fault Current calculation software

    Any recommendations for a a good fault current program for commercial building systems?

    Thanks

  2. #2
    Join Date
    May 2005
    Location
    Redmond, WA
    Posts
    781

    Re: Fault Current calculation software

    We use Easy Power - www.easypower.com

    It does good fault calculations, coordination studies and can be used for arc flash analysis.

    We tried others (Etap, EDSA, Capper/Dapper) but found the more powerful programs were also harder to learn and more complicated to use.

    There are some free programs from manufactuers like Cutler-Hammer that may work for commercial building applications.
    Bob Wilson

  3. #3
    Join Date
    Feb 2005
    Location
    Charlotte, NC
    Posts
    6,354

    Re: Fault Current calculation software

    I would go with easypower or SKM. SKM might be a little advanced for your application.

  4. #4
    Join Date
    Feb 2003
    Location
    New York, 40.7514,-73.9925
    Posts
    3,280

    Re: Fault Current calculation software

    I use SKM (Captor/Dapper)
    Ron

  5. #5
    Join Date
    Feb 2003
    Posts
    274

    Re: Fault Current calculation software

    Bussmann has a good free one on their site.

  6. #6
    Quote Originally Posted by rcwilson
    We use Easy Power - www.easypower.com

    It does good fault calculations, coordination studies and can be used for arc flash analysis.

    We tried others (Etap, EDSA, Capper/Dapper) but found the more powerful programs were also harder to learn and more complicated to use.

    There are some free programs from manufactuers like Cutler-Hammer that may work for commercial building applications.
    thank you much

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •