Mfr says to use 2 #18 AWG connected from auxiliary contacts in a 30/25/3W fused safety switch wired to a local manual controller on wheelchair lift. The
120 V. circuit is fed from a 25/1P CB. Does the 18 AWG control circuit need an in-line fuse? (Safety switch serves the 120v., 1-1/2 HP chair lift motor.)
120 V. circuit is fed from a 25/1P CB. Does the 18 AWG control circuit need an in-line fuse? (Safety switch serves the 120v., 1-1/2 HP chair lift motor.)