I need to tap off the meter main combo in the picture. I spoke to the City of Atlanta and they indicated if I stay within 10? of wire length and use a ?kit? from the manufacturer (GE) they will approve it. I called GE distributors and GE and no help there.
Basically I need a 60 amp 240 volt circuit to feed a rain tight sub panel to feed new pool equipment at a residence. The main panel is in the garage and there is too much concrete and obstacles to get power from that location. Pulling power from a meter main is my only option.
Is there an approved method of tapping off the meter/main if I stay within 10 feet of wire length?
Thank you,
Chris
http://forums.mikeholt.com/attachment.php?attachmentid=1456&d=1207152567
Basically I need a 60 amp 240 volt circuit to feed a rain tight sub panel to feed new pool equipment at a residence. The main panel is in the garage and there is too much concrete and obstacles to get power from that location. Pulling power from a meter main is my only option.
Is there an approved method of tapping off the meter/main if I stay within 10 feet of wire length?
Thank you,
Chris
http://forums.mikeholt.com/attachment.php?attachmentid=1456&d=1207152567