Low Voltage TRX

Status
Not open for further replies.
Recently installed a low voltage system. The TRX were 600watts 120 V feed to 12 volt track. The TRX is supplied with #10 MC cable. Thelow voltage side is fed with #10 rough service SO Cord, see attached, ourcurrent local inspector said this was not allowed. the location of the TRX isover 10 Ft. AFF and the low voltage is less than 3 Ft. long. The track is aopen buss system, so is this an acceptable installation?

 

Attachments

  • IMG_0426.jpg
    IMG_0426.jpg
    141.7 KB · Views: 0
Status
Not open for further replies.
Top