Portable metal carport bonding

[MDS75]

Looking at a job for a church that has a tubular metal carport they have a pole with 100 amp meter and main breaker panel about 3ft from carport. They want to add a circuit for a receptacle and a light. I noticed that the carport was not bonded to service what would be the best way to bond carport since its tubular with a chair lug and bolt.

 

[petersonra]

Looking at a job for a church that has a tubular metal carport they have a pole with 100 amp meter and main breaker panel about 3ft from carport. They want to add a circuit for a receptacle and a light. I noticed that the carport was not bonded to service what would be the best way to bond carport since its tubular with a chair lug and bolt.

I would think that mounting the receptacle and light to the frame of the car port would be adequate bonding via the EGC that will be run with the circuit.

 

[LarryFine]

Or a appropriately-sized pipe bonding clamp, or a bolt and nut with a lug, or . . .

 

[MDS75]

That's what I was thinking EGC would bond it .