Permanent above ground resin pool and 4 points of bonding????

Status
Not open for further replies.

Gasman69

New member
Location
Medina, ohio
Ok, kinda scratching my head on this one or just over thinking it. I just had a resin pool with a steel wall installed. Uprights, track and rails are all resin. Water is bonded thru skimmer plate. Do I still need to bond the wall in 4 locations or just bond to the wall seem with a lug and call it a day?
 

Little Bill

Moderator
Staff member
Location
Tennessee NEC:2017
Occupation
Semi-Retired Electrician
I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the
report-40b.png
button at the bottom left corner of the post.
 
Status
Not open for further replies.
Top