Announcement

Collapse
No announcement yet.

How to design a system that has 3 electrical boxes over an 850 ft. distance

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • charlie b
    replied
    I am closing this thread in accordance with forum rules. This forum is intended for use by electricians and electrical contractors, inspectors, engineers, and vendors with their job-related duties. We are not allowed to provide how-to advice to persons who are not employed in this industry, or persons who do not perform electrical installation or maintenance as part of their jobs.

    Leave a comment:


  • How to design a system that has 3 electrical boxes over an 850 ft. distance

    I want to run wire from my electrical pedestal so I can have power for electrical equipment at 350 feet, 535 feet and 820 feet. My calculations are that I can run aluminum 4/0 AWG (212 kcmil) the entire distance and have 100 AMP breaker at the 1st panel at 350 ft., 75 AMP breaker at the 2nd panel at 353 ft. and a 50 AMP breaker at 820 ft. The county inspector says I can not do that and have to use 40 AMP breakers at each location. The voltage drop will not exceed 7% when I have the breakers placed for the given distance. Am I wrong and if not what should I tell the inspector so I can maximize my project?
Working...
X