Announcement

Collapse
No announcement yet.

Power analyzer recommendation's ( Fluke )

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Power analyzer recommendation's ( Fluke )

    Now that we are getting into looking at energy savings I've been asked to start looking at charting the run times and energy usage of CNC machines on the floor . I know we will go with Fluke recorder just wanted some recommendations for what to get . Easy to set up and use . They are asking we get full load amps , unloaded amps , average run time during the day , etc ...

    #2
    I like the dranetz. In my opinion easier to set up than the flukes.

    Comment


      #3
      Originally posted by MrJLH View Post
      I like the dranetz. In my opinion easier to set up than the flukes.
      +2
      I second that. HDPQ

      Comment


        #4
        For single phase I use the Fluke 43B simple simple

        Ifyoucan'texplain itsimply youdon'tunderrstanditwellenough- Albert Einstein

        Comment


          #5
          For your application anything with a usb interface to laptop will work the Fluke stuff is good. Have even used Picotech laptop data logger attachments or low cost 4 channel PC scopes from china for similar functions.

          Comment

          Working...
          X