Junction box to cable tray transition

Status
Not open for further replies.
S

Shaggy825

Member
Location
Taneytown, MD USA
I asked this question on the low volt forum and didn't get any responses. Do they make anything that will attach cable tray to a large junction box? I have a duct bank coming into the building with 10 5" conduits. I set a 30"x30"x24" deep J box on those conduits now I have to change to cable tray. This is in an exposed area. I would like it to look nice. I was planning on putting in chase nipples where it changes to cable tray so the wires can go through the chase nipples and into the tray. I also though about cutting the side of the J box and putting trough liner around it. But with it being exposed, I thought that this wouldn't be the way to go. I am using Flextray that is 18" wide and 4" deep. Any good idea's out there?
 
S

Shaggy825

Member
Location
Taneytown, MD USA
I wonder why it didn’t come up on google. I did download the brochure for Flextray and they didn’t have that listed as an option. Thank you I’ll look around for that.


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.
Top