Announcement

Collapse
No announcement yet.

Wire run location inside concrete slab - HELP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hbiss
    replied
    Originally posted by LarryFine View Post
    "Where do you want me to NOT run the conduit?"
    That's the beauty of Revit. Everything is in there and when you go to add a conduit on the electrical drawing it will give you clash warnings if you have a beam, duct, pipe or whatever in the way of your route on any of the other drawings.

    You can also take the dimensions off the drawing and make up the bends in the shop.

    -Hal

    Leave a comment:


  • jaggedben
    replied
    Originally posted by jh-bklyn View Post
    ...Does anyone know a NEC or IBC code citation stating who's is responsible to determine the path route for the wires between the receptacle and panel board.

    Thanks>>>>
    These things are not in any code. They may or may not be in your contract, or the electrician's. You will have to work it out with the electrician and/or client.

    Leave a comment:


  • LarryFine
    replied
    "Where do you want me to NOT run the conduit?"

    Leave a comment:


  • oldsparky52
    replied
    Originally posted by hbiss View Post
    Maybe they are used to architects who design using Revit.

    https://videos.autodesk.com/zencoder...-1920x1080.mp4

    -Hal
    After watching that, the contractor's question makes more sense.

    Leave a comment:


  • hbiss
    replied
    Originally posted by jh-bklyn View Post

    We are now working on a project in the Caribbean and the contractor is asking us to draw the layout where he should put the conduit that will be encased in the concrete slab.
    Maybe they are used to architects who design using Revit.

    https://videos.autodesk.com/zencoder...-1920x1080.mp4

    -Hal

    Leave a comment:


  • oldsparky52
    replied
    Why does he think it's your job?

    Does he think it is impossible to do what you drew?

    Leave a comment:


  • jh-bklyn
    started a topic Wire run location inside concrete slab - HELP

    Wire run location inside concrete slab - HELP

    As NY design engineers we always locate the receptacles on a floor plan with a numeric home run marker indicating the circuit on the panel board. The electricians have always decided where and how to run the wires through floors and walls to get to the load center.

    We are now working on a project in the Caribbean and the contractor is asking us to draw the layout where he should put the conduit that will be encased in the concrete slab. Does anyone know a NEC or IBC code citation stating who's is responsible to determine the path route for the wires between the receptacle and panel board.

    Thanks>>>>
Working...
X