Announcement

Collapse
No announcement yet.

class1 division1 camera hook ups

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    class1 division1 camera hook ups

    so im running pipe for cameras that are explosion proof encased in a class1 division 1 building ,my question is their a flex able pipe I can use to connect to the cameras or do I have to run rigid directly into the cameras and if so do I have to use seals at those connections

    #2
    Originally posted by pappasmurf View Post
    so im running pipe for cameras that are explosion proof encased in a class1 division 1 building ,my question is their a flex able pipe I can use to connect to the cameras or do I have to run rigid directly into the cameras and if so do I have to use seals at those connections
    They are called explosionproof flexible couplings. You will still have to seal the enclosure.
    "Bob"
    Robert B. Alexander, P.E.
    Answers based on 2017 NEC unless otherwise noted.

    Comment


      #3
      Originally posted by rbalex View Post
      And they cost an arm and three legs each!
      From a previous thread, note that they can be made in longer than standard lengths by special order. (two arms and four legs, AFAIK)

      Comment


        #4
        Originally posted by GoldDigger View Post
        And they cost an arm and three legs each!
        ...
        About $100 for a 1/2" x 12" and they are not very flexible in that short of a length.
        Don, Illinois
        (All code citations are 2017 unless otherwise noted)

        Comment

        Working...
        X