Announcement

Collapse
No announcement yet.

Blinking Deck Dots

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Blinking Deck Dots

    I installed a bunch of so called deck dots for a customer in their deck. They are very small LED lights that get wired back to a transformer/driver that plugs into a 120 volt receptacle. Recently the customer reports that after running for a few minutes they start to blink. I’m assuming the driver needs replacement. Any thoughts on this?

    #2
    Faulty or undersized LED driver


    Sent from my iPhone using Tapatalk
    [COLOR="Blue"]Brought to you by Carl's Jr.[/COLOR]

    Comment


      #3
      Originally posted by brantmacga View Post
      Faulty or undersized LED driver


      Sent from my iPhone using Tapatalk
      I has worked for four years. Must be faulty. It came from supplier As a kit so I hope they sized it correctly.

      Comment


        #4
        Anything that affects every light must be caused by a common component, i.e., the power supply.
        Master Electrician
        Electrical Contractor
        Richmond, VA

        Comment


          #5
          Blinking Deck Dots

          Originally posted by mkgrady View Post
          I has worked for four years. Must be faulty. It came from supplier As a kit so I hope they sized it correctly.
          In that case, I’d say the driver is faulty. But it wouldn’t hurt to make sure it’s not being driven too hard.


          Sent from my iPhone using Tapatalk
          [COLOR="Blue"]Brought to you by Carl's Jr.[/COLOR]

          Comment

          Working...
          X