Announcement

Collapse
No announcement yet.

california rules.....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    california rules.....

    you have canopy lighting around a commercial building.
    it is 0-10 dimmable.

    there needs to be a motion sensor that dims the lights 50%
    after 15 minutes. title 24 rules.

    the sparky didn't plan for it.

    a fast solution:

    lutron
    RMJS-8TNDV-B power pack
    LRF2-occRBPWH occupancy sensor
    Pico 3 button dimmable switch.

    in extended programming, set the power pack
    to occupancy level 100% (part on)
    unoccupied level to 50% (part off)

    instructions in advanced programming in the info with the power pack.

    you are welcome.
    ~New signature under construction.~
    ~~~~Please excuse the mess.~~~~

    #2
    California rules..... expensive
    Having an inspector who is competent to fix the problem as well as just detect it....priceless.

    Comment


      #3
      Originally posted by GoldDigger View Post
      California rules..... expensive
      Having an inspector who is competent to fix the problem as well as just detect it....priceless.
      this is a $100 fix, without much redoing of anything. that is not bad, to be honest.

      it will work standalone, so the T20 365 day timeclock that shuts stuff off will make the
      whole thing compliant.

      after a few years doing this, i have a phone book worth it's weight in gold.
      i got the solution this evening, speaking with the senior Vive engineer for lutron.
      he was gracious enough to call me back, and had the numbers for the parts in his head.

      he was on his way to san diego for monday morning work. i owe him a cheeseburger.
      ~New signature under construction.~
      ~~~~Please excuse the mess.~~~~

      Comment


        #4
        why was sparky unaware of title 24 ? too new?

        ~RJ~

        Comment


          #5
          As a trade we need to stop the "I can do it "cheap n easy", other trades would make you take down half the building to fix something, we try to do it through a 1/2" hole and cut each others xalls off to get the job. My point is make it easy on you let the customer pay.

          Comment


            #6
            Originally posted by romex jockey View Post
            why was sparky unaware of title 24 ? too new?

            ~RJ~
            no. i looked at the prints 4 months ago, when he first started it, and
            the lights were not there then. they were added, and the EE didn't
            put any notes on the prints.

            so.... i discovered it last night while getting papers ready for this morning.
            not doing his thing this morning, doing other ones.
            ~New signature under construction.~
            ~~~~Please excuse the mess.~~~~

            Comment


              #7
              Originally posted by sameguy View Post
              As a trade we need to stop the "I can do it "cheap n easy", other trades would make you take down half the building to fix something, we try to do it through a 1/2" hole and cut each others xalls off to get the job. My point is make it easy on you let the customer pay.
              that will work well. i'll just tell them "no" and walk away.
              ~New signature under construction.~
              ~~~~Please excuse the mess.~~~~

              Comment


                #8
                Not saying walk away, just make them pay.
                Ever have to get a factory guy to facilities? You pay, airfare, hotel, car, and payroll, they could have told you over the phone for free; I just see Electrical often leaves money on the table and jumps through hoops other trades don't.

                Comment

                Working...
                X