Announcement

Collapse
No announcement yet.

CL2 to door buzzer and intercom

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    CL2 to door buzzer and intercom

    A fella at the church I attend will be supplying a door clicker for an entry door and an intercom to speak to someone inside to hit buzzer button...
    Not a plenum ceiling and the run will be through about 20' in a christian school.
    Do you think I'll be ok to run a 3 wire (2 with a spare) 20 gauge CL2 to the door clicker (buzzer) and a 5 wire 20 gauge CL2 to the intercom ?
    Thank you
    " I'm at a crucial part of my painting "...........Monika Danneman

    #2
    That's what that wire is for, no.

    -Hal

    Comment


      #3
      Originally posted by hbiss View Post
      That's what that wire is for, no.

      -Hal
      Is that a yes or a no ??

      I was looking around and considering some type of cat or shielded twisted to the intercom but I'm thinking the 5 wire would work and just easier to get at the supply house.
      " I'm at a crucial part of my painting "...........Monika Danneman

      Comment


        #4
        Wasn't clear what you were getting at from your OP with all that extraneous information. Is this some kind of apartment house intercom like Aiphone? Sometimes they do require twisted pairs. Best to check the installation instructions. For only 20 feet you probably could get away with CAT5 but to the door release I would run 2 conductor thermostat wire.

        -Hal

        Comment

        Working...
        X