No announcement yet.

Video doorbell power wiring

This topic is closed.
  • Filter
  • Time
  • Show
Clear All
new posts

    Video doorbell power wiring

    Looking into video doorbells, most have a 16-24VAC requirement. Builder has run CAT5e to doorbell. Does this need to be replaced with 18/2 doorbell cable before installing a video doorbell or will the CAT5e support the voltage input without issues?

    I would suggest you read the specs on the video doorbell or contact the mfg regarding the wire size.
    Beyond that, we can't really help any further and........

    I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.

    If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

    A reminder to all members, if you see a questionable post, feel free to report it by clicking the button at the bottom left corner of the post.
    If you aim at nothing, you will hit it every time!