Mounting conduit

[SMB]

I need some help and not sure how to do it. I need to mount 6, 3/4" IMC conduits to an existing cable ladder on a 60' high tower. I was looking at Caddy clips but they can't be used outside. I need to mount to a piece of 3" x 3" x 1/4" angle bar (the conduit will be perpendicular to the 1/4" side). I do not want to do any drilling. Any suggestions.

As usual, thank you for any and all recommendations.

Steve

 

[LarryFine]

A pair of beam clamps (with threaded holes on the back) on the lip, a foot or so of strut, and the usual strut hardware.

 

[iwire]

Check out OZ-Gedney, if you hanging IMC off the side of a 60' tower you want top quality stuff.

http://www.o-zgedney.com/PDF/OZG_EA_UBoltsHangers[1].pdf

Check out page EA19

 

[Cow]

Check out OZ-Gedney, if you hanging IMC off the side of a 60' tower you want top quality stuff.

http://www.o-zgedney.com/PDF/OZG_EA_UBoltsHangers[1].pdf

Check out page EA19

I agree. We've been able to do almost everything with the 3 hangers shown on page EA17.

 

[JJWalecka]

Check out OZ-Gedney, if you hanging IMC off the side of a 60' tower you want top quality stuff.

http://www.o-zgedney.com/PDF/OZG_EA_UBoltsHangers[1].pdf

Check out page EA19

I didn?t know that a spilt coupling existed (EA10.)

JJ