Old 5 lead GE motor wiring

Status
Not open for further replies.
H

hunt4679

Senior Member
Location
Perry, Ohio
I have a 120v 1/2hp reversing ge motor with 5 leads motor # 5kc63ab776 Im guessing about 50 years old I need a wiring diagram and cant find one
I just bought a new lathe and feel real dumb that as an electrician I cant wire it
Any help would be great
Thanks Jason
 
I think that is it thanks soo much Jljohnson, Ive been looking for the last 3 days and asking everyone I know.

LarryFine if you read down on that post the guy says it is drawn as just when you throw the switch before the relay closes

Thanks for the help
 
If I remember right instant reversing motors use the current relay to put both windings on line to bring the motor to a stop quickly, once the current has dropped below a set level,it opens to start in the reverse direction.
Kind of like dynamic braking
 
That diagram is wrong the drum switch doesnt work that way. He might have a 3 phase switch. but I think I can work with it we will see if I can release the magic smoke.
 
hunt4679 said:
That diagram is wrong the drum switch doesnt work that way. He might have a 3 phase switch. but I think I can work with it we will see if I can release the magic smoke.
Click to expand...

Here was a post in that forum about your same motor, that also linked to the same diagram:

http://www.practicalmachinist.com/vb/showthread.php?t=158309

Here is the original thread of that diagram with many interesting photos of disassembly, of the lathe, motor and all and mor diagrams, read the whole thead:

http://www.practicalmachinist.com/vb/showthread.php/1947-model-9a-128005.html
 
Status
Not open for further replies.
Top