Lighting Panel Mounting Height

[strand16]

I have to install a lighting control panel, it is going to switch lighting circuits through a low voltage relays, tied into a modem to the Utility company for energy curtailment. I have been looking 409 and I don't see a mounting height. Because of space restrictions,, It would be great to mount it at about 8' to the bottom. Is this subject to a height requirement like a regular service? I couldn't find where it was.
Thanks for your input.
Strand16

 

[strand16]

I'll use spell check next time.

I'll use spell check next time.

sorry for the hurried post, I'll need to reread and use spell check. OK

 

[Volta]

Well, someone may take 404.1 to include any 'switching devices', and point to 404.8(A) if there is any manual override switch on the panel.

Otherwise it seems ok if no user handles to grip.

Don't forget that 110.26 still applies.

 

[augie47]

sorry for the hurried post, I'll need to reread and use spell check. OK

(ran spellcheck for you)

 

[strand16]

thanks

thanks

Thanks Augie

 

[e57]

Don't forget that 110.26 still applies.

I'm going to agree - and back you 100% when someone says it doesn't... It won't be long....

 

[Volta]

I'm going to agree - and back you 100% when someone says it doesn't... It won't be long....

Thanks, I can use the help! :grin:

 

[Jim W in Tampa]

8 feet is bit high or did you mean inches " not '